|EP1 EVOKED POTENTIAL
Evoked Potential Caps are available in all sizes. Standard electrode placements are C3', Cz', C4', 01, 0z, 02 and ground. Other electrode placements are available on special order.
|E2 ELECTRODE BOARD ADAPTER*
The Electrode Board Adapter converts the EEG instrument from individual electrodes to the Electro-Cap. Each wire and phone tip is color coded for easy identification. Once the EBA is plugged into the machine, a single plug connects the appropriate cap. Special and custom EBA's are available.
|E3-L BODY HARNESS - 44" - 52"
E3-M BODY HARNESS - 30" - 44"
E3-S BODY HARNESS - 21" - 30"
An adjustable elastic band that fastens around the patient's chest with Velcro. Cap straps attach the cap to the body harness. Proper use of the body harness will hold the cap securely in place reducing the possibility of movement artifact and high impedances.
|E4 QUICK INSERT ELECTRODE*
A temporary electrode which will override the cap wiring in the event of a faulty electrode during a test. A Quick Insert Electrode may be placed into the mount of the faulty electrode and connected directly to the EEG machine until the cap can be properly repaired.
|E5-9 EAR ELECTRODES* - Standard 9mm cup
E5-6 EAR ELECTRODES* - Infant 6mm cup
A pair of pure tin cup electrodes with a 48" (122 cm) lead wire and a 2 mm phone tip. A spring-clip back, covered with plastic for patient comfort, is used to hold the electrode in place.
|E6 DISPOSABLE SPONGE DISKS (package of 100)
Foam circles with adhesive backing used on the forehead or on any other hairless areas. They keep the ECI Electro-Gel from spreading between the electrodes and absorb perspiration. It is recommended the disks be placed on FP1 and FP2 to prevent the cap from moving up on the forehead. Sponge disks are effectively used on infants due to the tenderness of the scalp and may assist in fitting the caps properly.
|E7 NEEDLE/SYRINGE KIT
Kit includes 1 5cc syringe and 2 16g Special Blunted Needles.
E8 SPECIAL BLUNTED NEEDLE
E8B SPECIAL BLUNTED NEEDLES (package of 100)
Blunted 16g needles for use with syringe. Used for dispensing of gel into electrodes and scalp preparation. It is recommended that the needles be discarded after each use according to hospital infection control procedures.
|E9 ECI ELECTRO-GEL
E10 ECI ELECTRO-GEL (32 oz.)
E11 ECI ELECTRO-GEL (128 oz.)
ECI Electro-Gel has been specifically formulated for the use with Electro-Cap products. Other brands or types of gel will cause high electrode impedance and various types of electrode artifacts.
|E12 SPECIAL HEAD MEASURING TAPE
Special color-coded Head Measuring Tape used to determine proper cap size quickly and effectively. Color-coding coincides with cap colors. Proper cap size is vital for assuring accurate electrode placement and prolonging cap life.
|E13-L CAP STRAPS - For large or
E13-S CAP STRAPS - For small or extra small caps
Replacement straps with buckles and snaps. Used to hold the caps securely in place by attaching to cap and body harness.
|E14 ECG ELECTRODE*
A recessed pure tin electrode mounted on an adjustable elastic band. Electrode connection is made with a 72" (183 cm) lead wire and a 2mm phone tip. It is used for electrocardiographic recordings. May also be used as a reference or ground electrode.
|E15 EMG ELECTRODE*
Two recessed pure tin electrodes mounted on an adjustable elastic band. Electrode connection is made with a 72" (183 cm) lead wire and a 2mm phone tip. It is used for muscle recording.
LIQUID DETERGENT (14oz.)
Recommended for washing Electro-Caps. Other soaps and detergents may leave a residual film on the electrode metal. If the soap film builds up and excessively coats the electrode, high electrode impedances and electrode artifacts may result.
|E17 BIO-POTENTIAL ELECTRODE*
A recessed pure tin electrode with a 72" (183 cm) lead wire and a 2mm phone tip. Designed for extra electrode placements under the cap fabric on an occasional basis. May also be used in place of E21 Disk Electrodes where a recessed electrode is preferred by using an E6 Disposable Sponge Disk to hold the Bio-Potential Electrode in place.
|E19 SPARE ELECTRODE DISK
E20 SPARE ELECTRODE MOUNT
Electro-Cap components sold separately for repair purposes.
|E21-9 DISK ELECTRODE* - Standard
E21-6 DISK ELECTRODE* - Infant 6mm cup.
A pure tin cup electrode with a 48" (122 cm) lead wire and a 2mm phone tip.
|E23-5 CHIN STRAPS -
E23-7 CHIN STRAPS - Length 7"
Used as an alternative to the E3 Body Harness for situations such as ICU and ER. Effective with combative patients and those who feel restrained by the Body Harness. Straps secure the cap by fastening under the patience's chin with Velcro®. It is recommended that E24 Chin Strap Pads be used with the Chin Straps.
|E24 CHIN STRAP PADS
(package of 100)
Disposable sponge pads will provide extra comfort when using E23 Chin Straps.
|E25 ADHESIVE ELECTRODE PADS
(package of 100)
Foam pads with adhesive backing. Use with E21 Disk Electrode as an alternative to the E5 Ear Electrodes or virtually any additional electrode placement (i.e. eye, ECG, EMG etc.)
|E26 ORANGE STICKS
(package of 100)
Recommended for removing gel build-up from electrode disks and mounts. May also be used during routine washing procedures to aid in removing excess gel. Any objects that could scratch the metal electrode disks should not be used.
|E27 DISPOSABLE ECG ELECTRODES
(package of 100)
Solid conductive membrane adheres electrode pads to all skin types and conditions, eliminating patient preparation. Electrode tab accepts E28 Alligator Clip Adapter.
E28 ALLIGATOR CLIP ADAPTERS* (package of 2)
For use with E27 Disposable ECG Electrodes. Alligator clip with a 48" (122cm) lead wire and a 2mm phone tip. Other plug or tip sizes are available upon request.
|I2 INFA-BODY HARNESS
I3 INFA-HEAD MEASURING TAPE
I4 SKIN PREP PADS
|R8-(2800, 2805) MetriCide® |
A cold sterilizing soaking solution recommended for disinfecting Electro-Caps. It requires no dilution, and will not damage cap fabric or the electrodes. Available in either a quart or a gallon.
|INS-1 INSTRUCTIONAL MANUAL
VID-1 INSTRUCTIONAL VIDEO
The Instruction Manual is fully illustrated with step-by-step instructions. The Instructional Video is approximately 12 minutes in length, and covers the basic application and care of Electro-Caps.