Evoked Potential Caps are available in all sizes. Standard electrode placements are C3', Cz', C4', 01, 0z, 02 and ground. Other electrode placements are available on special order.
The Electrode Board Adapter converts the EEG instrument from individual electrodes to the Electro-Cap. Each wire and phone tip is color coded for easy identification. Once the EBA is plugged into the machine, a single plug connects the appropriate cap. Special and custom EBA's are available.
E3-M BODY HARNESS - 30" - 44"
E3-S BODY HARNESS - 21" - 30"
An adjustable elastic band that fastens around the patient's chest with Velcro. Cap straps attach the cap to the body harness. Proper use of the body harness will hold the cap securely in place reducing the possibility of movement artifact and high impedances.
A temporary electrode which will override the cap wiring in the event of a faulty electrode during a test. A Quick Insert Electrode may be placed into the mount of the faulty electrode and connected directly to the EEG machine until the cap can be properly repaired.
E5-6 EAR ELECTRODES* - Infant 6mm cup
A pair of pure tin cup electrodes with a 48" (122 cm) lead wire and a 2 mm phone tip. A spring-clip back, covered with plastic for patient comfort, is used to hold the electrode in place.
Foam circles with adhesive backing used on the forehead or on any other hairless areas. They keep the ECI Electro-Gel from spreading between the electrodes and absorb perspiration. It is recommended the disks be placed on FP1 and FP2 to prevent the cap from moving up on the forehead. Sponge disks are effectively used on infants due to the tenderness of the scalp and may assist in fitting the caps properly.
Kit includes 1 5cc syringe and 2 16g Special Blunted Needles.
E8 SPECIAL BLUNTED NEEDLE
E8B SPECIAL BLUNTED NEEDLES (package of 100)
Blunted 16g needles for use with syringe. Used for dispensing of gel into electrodes and scalp preparation. It is recommended that the needles be discarded after each use according to hospital infection control procedures.
E10 ECI ELECTRO-GEL (32 oz.)
E11 ECI ELECTRO-GEL (128 oz.)
ECI Electro-Gel has been specifically formulated for the use with Electro-Cap products. Other brands or types of gel will cause high electrode impedance and various types of electrode artifacts.